“Valgro-Hyzer” A professional PCB brushing machine available with, water rinsing – brushing – Squeezing – Thermo adjustable warm air blowing and drying system. Suitable for all cleaning steps in PCB and printing industry. PCB surface is perfectly cleaned and thus prepared for good subsequent adhesion of all coatings and batter printing operation.
• Solid Metal body construction
• Professionally designee
• Simultaneous brushing, washing and drying
• Low space requirements
(PCB ni uppar machine mukvu front) |
 |
Features
• Aluminium, Stainless steel, and powder coated Steel construction
• Brushing, oscillation, water rinsing, Squeezing, warm air turbine blowing, drying
• Transparent top lid with emergency security switch
• Reversal conveyor speed for emergency / accident case.
• Variable Conveyor speed
• Adjustable brushing pressure
• Brush, dryer, turbine blower, oscillation, and convey can be switched on and off separately.
• The double side parallel adjustment of the brush is of great importance, because in contrast to the widely used single side brush adjustments only the mutual parallel adjustment will enable a long lasting uniform brushing result.
• The machine can be equipped with various brushes so that finishing pcbs before laminating is possible as well as slight deburring after drilling can be fulfilled.
• The integrated frequency converter allows the machine to work worldwide with all power supply systems and enables smooth start and enhanced motor protection. |
| Model PCB 24 Baby |
| PCB24 Baby series prove: a professional brushing machine specially designed for use in small and laboratories production purpose at affordable prices. This machines have single side brushing station with water rinsing, adjustable oscillation and transport speed and fully wipe and dry zones. Suitable for all cleaning steps in PCB or printing industry. |
|
| Technical details are subject to change without notice. |
| Valgro-Hyzer Model PCB 18 & PCB 24 |
Scrubbing and deburring machine
Valgro-Hyzer scrubbing machine available with Top and bottom brushing attachment with water rinsing – brushing – Air blowing and drying system. Suitable for all cleaning steps in PCB or printing industry. PCB surface is perfectly cleaned and thus prepared for good subsequent adhesion of all coatings and batter printing operation. PCB18 machine specially designed for PCB’s industries, Metal label manufacturer, manufacturer and numerous cleaning operations. Machines are designed to suit individual customer application and requirement. |
 |
| |
| Valgro-Hyzer Model PCB 24 |
| The PCB 24 series is the highest developed brushing machine in our range. It is ideally suited for professional prototyping or small batch production in modern PCB laboratories. The machines perform double side operation. Upper and lower brushing rollers are adjustable in pressure and have a digital read-out. transport speed are variable. The wet procession system comes together with a powerful squeeze + hot-air dryer. The standard version has a closed loop rinsing system with integrated rinse water tank, filter and pump unit. |
|
| This saves the user money for fresh water and headaches about how to meet waste water regulations. On request we offer different version with external water supply. The last version of the PCB 24 is the EWS model. This is a simple bench top machine with external water supply and no filter unit. |
| Range of Models |
| Model |
PCB 24 Baby |
PCB 18 |
PCB 24 |
PCB 24 PRM |
| Brush Station |
Single Station
Top Side |
Two Station
Top & Bottam |
Two Station
Top & Bottam |
Two Station
Top & Bottam |
| Pre Washing / Cleaning |
N. A |
N. A |
N. A |
Available |
| Total Dimensions
(H X W X L) (+25mm) |
1150mm x 1150mm
x 1080 mm (+10mm) |
1150mm x 900mm x 2000mm (+10mm) |
1150mm x 1150mm x 2000mm (+10mm) |
1150mm x 1150mm x 2250mm (+10mm) |
| Machine Weight @ |
800kgs |
1200kg |
1400kg |
1500kg |
| Working width |
610mm |
450 mm |
610 mm |
610 mm |
| Board size (minimum) |
100mm |
100mm |
100mm |
100mm |
| Board thickness Min / Max (rigid boards only) |
0,3 – 5 mm |
0,3 – 5 mm |
0,3 – 5 mm |
0,3 – 5 mm |
| Brush Dimensions
(Od x Width x ID) |
125 x 610 x 50.8mm |
125 x 450 x 50.8mm |
125 x 610 x 50.8mm |
125 x 610 x 50.8mm |
| Brushing speed |
1440 RPM |
1440 RPM |
1440 RPM |
1440 RPM |
| Brush Oscillation stroke |
16 mm (8+ 8) |
16 mm (8+ 8) |
16 mm (8+ 8) |
16 mm (8+ 8) |
| Brush Oscillation frequency |
150 stroke / min |
150 stroke / min |
150 stroke / min |
150 stroke / min |
| Conveyor width |
610mm |
450mm |
610mm |
610mm |
| Conveyor speed |
ca. 0,2 - 2 m/min (Maximum 6m/min) |
ca. 0,2 - 2 m/min (Maximum 6m/min) |
ca. 0,2 - 2 m/min (Maximum 6m/min) |
ca. 0,2 - 2 m/min (Maximum 6m/min) |
| Rinse water |
Available |
Available |
Available |
Available |
| Rinse water inlet |
20 mm |
20 mm |
20 mm |
20 mm |
| Rinse water outlet |
32 mm |
32 mm |
32 mm |
32 mm |
| Rinse water pressure |
|
|
|
|
| Dryer flow |
1.5 bar |
1.5 bar |
1.5 bar |
1.5 bar |
| Electrical Connection: |
110 - 230 V, 50–60 Hz |
110 - 230 V, 50–60 Hz |
110 - 230 V, 50–60 Hz |
110 - 230 V, 50–60 Hz |
| Price Ex works |
|
|
|
|
|
      |
|
|
PCB Brushing Machine 
