| # F 60 Clean N Finish
wheel: Mineral A/0, Grade CRS
• Removals of surface contaminants
such as dust, Medium corrosion, and Light
weld spatter Cleaning, dirt, Scale and
residue of all type.
• Surface preparation for Prior
to painting or any type of coating.
• Cleaning and conditioning before
welding. • Blending of coated abrasive
scratch Marks • Uniform Scratch
pattern on Non ferrous Material. •
Brushed line finish on soft metal, plastic,
woods. • General maintenance cleaning.
• Excellent bonding occurs in such
processes any coating, Painting, Soldering
anodizing and welding. • Replace
of convetional products i.e. steel wool,
wire brushes, coated abrasive, scraper
etc.
# F 40 Blending wheel: Mineral
Alo, Grade Medium
•After use of #7060 brush for better
finishing result • Improve surface
finishes on metal • Removing Coated
Abrasive Scratches Marks • Blending
parting lines, flashing removing solder
and adhesive overruns. • Cleaning
of minor dust, micro burr removing. •
Finish watch case and watchstrap. •
Final finishing of wood, • Small
burr removal on aluminium. • Finishing
of die and Mould • Deburring and
finishing of surgical instrument. •
Matt finish on plastic and aluminum •
Satin finishing on Metal t Clean and finishes
faster, easier with better result than
other conventional products like Coated
abrasives flap wheels, steel wool, Wire
brush, Buffing wheels, Felt Mops, Etc.
# F 47 General purpose wheel:
Mineral Alo, Grade Very fine
•As the name suggest this wheel
is designed to meet an unlimited number
of industrial application. * After use
# 70 •0 brush for better result
• Cleans and finishes faster, easier
with better result then steel wool or
coated abrasives wheels. • Cleaning
prior to welding • Blend surface
of surgical instruments • Decorative
stains finish • Finish prior to
buffing / plating • Stain finish
cutlery and dairy equipment • Remove
heat marks •- Blending micro scratch
marks • Creating consistent finishing
# F 51 Super Finish wheel: Mineral
Sic., Grade Super Fine
• Specially designed for aluminium
and cast iron components After use # 7040
brush for better result • Condition
soft metal Surface prior to welding remove
light oxide • Cleaning copper electrical
buss bars Finishing printed circuit boards
• Deflesh edges of plastic molded
parts • Surface preparation on aluminium,
• Blend surface of surgical instruments
• Decorative stains finish + Finish
prior to buffing / plating - Stain finish
cutlery and dairy equipment« Remove
heat marks • Blending micro scratch
marks
#F 48 Ultra Polishing wheel:
Mineral Sic., Grade Ultra fine
* Uses after #F7051 brushes for better
polishing effect, • Light finishing
of aluminum. • Wood defusing. •
Small burr removal on aluminum, •
Finishing Polishing of surgical instrument,
• After plating for mirror finish.
Satin finish on cutlery & Jewellary
equipment. • Final finish on metals,
woods, plastics and composites material
• Right for cosmetic cleaning •
Creating consistent finishes. |
