High Rate of Cut, Provide Uniform Scratch Pattern :

"Valgro-Fynex" Combi Flap wheels are manufactured from closely packed strips of Valgro heavy duty material with the addition of a coated abrasive strip between each layer. The Valgro materials between the layers of coated abrasive provide a resilient backing that eliminates the layover effect encountered with conventional abrasives flap wheel.

The Valgro-Fynex metal surface combination system is the most versatile method for all applications where a linear scratch pattern required with reduces finishing cost. Whether you work in stainless steel, steel, aluminum, brass, copper or other alloys.

Interleaved Flap Brush are designed for electric hand tool as well as small bench grinder Automatic & Semi Automatic machinery such as pedestal grinders, polishing lathes, centreless grinders, drill motor, shaft grinders, Coil cleaning machines, Rotary machines, Straight line machines & Robotic equipment.

Specific application :

• Removing paint and conditioning metal surface.
• Weld removal and blending-in
• Removing heavy dirt and oxide before welding and painting on pipes and tubing
• Light sanding of wood before lacquer.
• Grains finishing stainless steel sheets after conventional coated abrasives.
• Hairline finish on large surface

Product Process Image

 

Features	Benefits
• Constructed of •"Valgro" Non-woven and Coated abrasives material	• Provide blending action while leaving final finish on work piece
• Improved heavy-duty material	• Durable • Resists smearing Consistent Finishes
• Smear, resistant	• Clean, Smear proof work surface

Kombi Flap brush - Standard Production

Dia meter-x width	Hole Diameter	Max RPM 1/min	Extra CRS +60	Coarse AM+80	Coarse Am+120	Medium ZM-150	Fine Fn+220
150 x25	50.8	3200	IFC60612	IFC80612	IFC120612	IFV150612	IFV220612
150 x 50	50.8	3200	IFC60622	IFC80622	IFC120622	IFV150622	IFV220622
200 x 25	76.2	2800	IFC60813	IFC80813	IFC120813	IFV150813	IFV220813
200 x 50	76.2	2800	IFC60823	IFC80823	IFC120823	IFV150823	IFV220823
250 x 50	140	2800	IFC60102	IFC80102	IFC120102	IFV150102	IFV220102
350 x 50	140	2500	IFC60122	IFC80122	IFC120122	IFV150122	IFV220122
350 x 50	190	1800	IFC60142	IFC80142	IFC120142	IFV150122	IFV220122
400 x 50	215	1200	IFC60162	IFC80162	IFC120162	IFV150162	IFV220162
450 x 50	254	1200	IFC60182	IFC80182	IFC120182	IFV150182	IFV220182

Two Abrasives Leaves

Dia meter-x width	Hole Diameter	Max RPM 1/min	Extra Coarse+60	Coarse AM+80	Coarse Am+120	Medium ZM-150	Fine Fn+220
150 x25	50.8	3200	2C60612	2C80612	2C120612	2V150612	2V220612
150 x 50	50.8	3200	2C60622	2C80622	2C120622	2V150622	2V220622
200 x 25	76.2	2800	2C60813	2C80813	2C120813	2V150813	2V220813
200 x 50	76.2	2800	2C60823	2C80823	2C120823	2V150823	2V220823
250 x 50	140	2800	2C60102	2C80102	2C120102	2V150102	2V220102
350 x 50	140	2500	2C60122	2C80122	2C120122	2V150122	2V220122
350 x 50	190	1800	2C60142	2C80142	2C120142	2V150122	2V220122
400 x 50	215	1200	2C60162	2C80162	2C120162	2V150162	2V220162
450 x 50	254	1200	2C60182	2C80182	2C120182	2V150182	2V220182

Three Abrasives Leaves

Dia meter-x width	Hole Diameter	Max RPM 1/min	Extra Coarse+60	Coarse AM+80	Coarse Am+120	Medium ZM-150	Fine Fn+220
150 x25	50.8	3200	3C60612	3C80612	3C120612	3V150612	3V220612
150 x 50	50.8	3200	3C60622	3C80622	3C120622	3V150622	3V220622
200 x 25	76.2	2800	3C60813	3C80813	3C120813	3V150813	3V220813
200 x 50	76.2	2800	3C60823	3C80823	3C120823	3V150823	3V220823
250 x 50	140	2800	3C60102	3C80102	3C120102	3V150102	3V220102
350 x 50	140	2500	3C60122	3C80122	3C120122	3V150122	3V220122
350 x 50	190	1800	3C60142	3C80142	3C120142	3V150122	3V220122
400 x 50	215	1200	3C60162	3C80162	3C120162	3V150162	3V220162
450 x 50	254	1200	3C60182	3C80182	3C120182	3V150182	3V220182

Kombi Paper wheels for wood market

Dia meter-x width	Hole Diameter	Max RPM 1/min	Coarse AM+80	Coarse Am+120	Medium ZM-150	Fine Fn+220
150 x25	50.8	3200	PC80612	PC120612	PC150612	PC220612
150 x 50	50.8	3200	PC80622	PC120622	PC150622	PC220622
200 x 25	76.2	2800	PC80813	PC120813	PC150813	PC220813
200 x 50	76.2	2800	PC80823	PC120823	PC150823	PC220823
250 x 50	140	2800	PC81025	PC121025	PC151025	PC221025

kombi Metal Surface Finish brush

Dia meter-x width	Hole Diameter	RPM	Extra Coarse+60	Coarse AM+80	Coarse Am+120	Medium ZM-150	Fine Fn+220
100 x100	19	3200	MSF6044 K	MSF80044 K	MSF12044K	MSF15044 K	MSF22044 K
115 x100	19	3200	MSF6054 K	MSF8054 K	MSF120454 K	MSF15054 K	MSF22054 K
150 x 75	50.8	2800	MSF6063 K	MSF8063 K	MSF12063 K	MSF15063 K	MSF22063 K

Note:- The text Marked with yellow colour are fast moving products.